Monitoring Water and Energy Cycles at Climate Scale in the Third Pole Environment (CLIMATE-TPE)

A better understanding of the water and energy cycles at climate scale in the Third Pole Environment is essential for assessing and understanding the causes of changes in the cryosphere and hydrosphere in relation to changes of plateau atmosphere in the Asian monsoon system and for predicting the possible changes in water resources in South and East Asia. This paper reports the following results: (1) A platform of in situ observation stations is briefly described for quantifying the interactions in hydrosphere-pedosphere-atmosphere-cryosphere-biosphere over the Tibetan Plateau. (2) A multiyear in situ L-Band microwave radiometry of land surface processes is used to develop a new microwave radiative transfer modeling system. This new system improves the modeling of brightness temperature in both horizontal and vertical polarization. (3) A multiyear (2001–2018) monthly terrestrial actual evapotranspiration and its spatial distribution on the Tibetan Plateau is generated using the surface energy balance system (SEBS) forced by a combination of meteorological and satellite data. (4) A comparison of four large scale soil moisture products to in situ measurements is presented. (5) The trajectory of water vapor transport in the canyon area of Southeast Tibet in different seasons is analyzed, and (6) the vertical water vapor exchange between the upper troposphere and the lower stratosphere in different seasons is presented

Determination of the Optimal Mounting Depth for Calculating Effective Soil Temperature at L-Band: Maqu Case

Effective soil temperature T e f f is one of the basic parameters in passive microwave remote sensing of soil moisture. At present, dedicated satellite soil moisture monitoring missions use the L-band as the operating frequency. However, T e f f at the L-band is strongly affected by soil moisture and temperature profiles. Recently, a two-layer scheme and a corresponding multilayer form have been developed to accommodate such influences. In this study, the soil moisture/temperature data collected and simulated by the Noah land surface model across the Maqu Network are used to verify the newly developed schemes. There are two key findings. Firstly, the new two-layer scheme is able to assess which site provides relatively higher accuracy when estimating T e f f . It is found that, on average, nearly 20% of the T e f f signal cannot be captured by the Maqu Network, in the currently assumed common installation configuration. This knowledge is important, since the spatial averaged brightness temperature (a function of T e f f ) is used to determine soil moisture. Secondly, the developed method has made it possible to identify that the optimal mounting depths for the observation pair are 5 cm and 20 cm for calculating T e f f at the center station in the Maqu Network. It has been suggested that the newly developed method can provide an objective way to configure an optimal soil moisture/temperature network and improve the representativeness of the existing networks regarding the calculation of T e f f

Analysis of soil hydraulic and thermal properties for land surface modeling over the Tibetan Plateau

Soil information (e.g., soil texture and porosity) from existing soil datasets over the Tibetan Plateau (TP) is claimed to be inadequate and even inaccurate for determining soil hydraulic properties (SHP) and soil thermal properties (STP), hampering the understanding of the land surface process over TP. As the soil varies across three dominant climate zones (i.e., arid, semi-arid and subhumid) over the TP, the associated SHP and STP are expected to vary correspondingly. To obtain an explicit insight into the soil hydrothermal properties over the TP, in situ and laboratory measurements of over 30 soil property profiles were obtained across the climate zones. Results show that porosity and SHP and STP differ across the climate zones and strongly depend on soil texture. In particular, it is proposed that gravel impact on porosity and SHP and STP are both considered in the arid zone and in deep layers of the semi-arid zone. Parameterization schemes for porosity, SHP and STP are investigated and compared with measurements taken. To determine the SHP, including soil water retention curves (SWRCs) and hydraulic conductivities, the pedotransfer functions (PTFs) developed by Cosby et al. (1984) (for the Clapp–Hornberger model) and the continuous PTFs given by Wösten et al. (1999) (for the Van Genuchten–Mualem model) are recommended. The STP parameterization scheme proposed by Farouki (1981) based on the model of De Vries (1963) performed better across the TP than other schemes. Using the parameterization schemes mentioned above, the uncertainties of five existing regional and global soil datasets and their derived SHP and STP over the TP are quantified through comparison with in situ and laboratory measurements. The measured soil physical properties dataset is available at https://data.4tu.nl/repository/uuid:c712717c-6ac0-47ff-9d58-97f88082ddc0

A Closed-Form Expression of Soil Temperature Sensing Depth at L-Band

L-band passive microwave remote sensing is one of the most effective methods to map the global soil moisture distribution, yet, at which soil depth satellites are measuring is still inconclusive. Recently, with the Lv's multilayer soil effective temperature scheme, such depth information can be revealed in the framework of the zeroth-order incoherent model when soil temperature varies linearly with soil optical depth. In this paper, we examine the relationships between soil temperature microwave sensing depth, penetration depth, and soil effective temperature, considering the nonlinear case. The soil temperature sensing depth often also named penetration depth is redefined as the depth where soil temperature equals the soil effective temperature. A method is developed to estimate soil temperature sensing depth from one pair of soil temperature and moisture measurement at an arbitrary depth, the soil surface temperature, and the deep soil temperature which is assumed to be constant in time. The method can be used to estimate the soil effective temperature and soil temperature sensing depth

Impact of profile-averaged soil ice fraction on passive microwave brightness temperature Diurnal Amplitude Variations (DAV) at L-band

The dynamic change of frozen soil is crucial to land-surface modeling, carbon feedback studies, ground engineering (e.g., constructions), and microwave remote sensing. L-Band satellite missions Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) are currently exploited to characterize soil into freeze or thaw (FT) states. However, brightness temperatures (TB) at L-band contain more information besides the FT state, particularly over permafrost or seasonally frozen soil, which has not been explored via current retrieval algorithms. To examine the potential for L-band TB observations, we define an index called Profile-Averaged Frozen Soil Fraction (Ff) related to Diurnal Amplitude Variation (DAV) of TB (i.e., ΔTB) based on the optical depth of the frozen soil column. We evaluated Ff inferred from the 0th-order microwave transfer model with the SMAP L1c product, the ground-based European Space Agency L-Band Radiometer III (ELBARA-III) TB observations, and temperature profiles collected at the Maqu station in northeastern Tibet. While there is a clear relationship between Ff and ΔTB, no apparent link exists with the ice content fraction (Ffi) within a fixed-depth soil column. The proposed model certifies that the profile-averaged soil ice content Ff relates to the dynamic microwave penetration depth by math and field measurement. The model reproduces well ΔTB in Period Freezing but has problems in Period Thawing when melted surface water obstruct the microwave signals. Our findings can be used to exploit ΔTB between 6 am and 6 pm, as a typically overpassing time by the SMOS and SMAP satellites, for estimating Ff, which can be further applied in weather/climate forecasting and for improving land-surface modeling

Determination of the Optimal Mounting Depth for Calculating Effective Soil Temperature at L-Band: Maqu Case

Effective soil temperature T e f f is one of the basic parameters in passive microwave remote sensing of soil moisture. At present, dedicated satellite soil moisture monitoring missions use the L-band as the operating frequency. However, T e f f at the L-band is strongly affected by soil moisture and temperature profiles. Recently, a two-layer scheme and a corresponding multilayer form have been developed to accommodate such influences. In this study, the soil moisture/temperature data collected and simulated by the Noah land surface model across the Maqu Network are used to verify the newly developed schemes. There are two key findings. Firstly, the new two-layer scheme is able to assess which site provides relatively higher accuracy when estimating T e f f . It is found that, on average, nearly 20% of the T e f f signal cannot be captured by the Maqu Network, in the currently assumed common installation configuration. This knowledge is important, since the spatial averaged brightness temperature (a function of T e f f ) is used to determine soil moisture. Secondly, the developed method has made it possible to identify that the optimal mounting depths for the observation pair are 5 cm and 20 cm for calculating T e f f at the center station in the Maqu Network. It has been suggested that the newly developed method can provide an objective way to configure an optimal soil moisture/temperature network and improve the representativeness of the existing networks regarding the calculation of T e f f

Estimation of Penetration Depth from Soil Effective Temperature in Microwave Radiometry

Soil moisture is an essential variable in Earth surface modeling. Two dedicated satellite missions, the Soil Moisture and Ocean Salinity (SMOS) and the Soil Moisture Active Passive (SMAP), are currently in operation to map the global distribution of soil moisture. However, at the longer L-band wavelength of these satellites, the emitting behavior of the land becomes very complex due to the unknown deeper penetration depth. This complexity leads to more uncertainty in calibration and validation of satellite soil moisture product and their applications. In the framework of zeroth-order incoherent microwave radiative transfer model, the soil effective temperature is the only component that contains depth information and thus provides the necessary link to quantify the penetration depth. By means of the multi-layer soil effective temperature (Lv’s T e f f ) scheme, we have determined the relationship between the penetration depth and soil effective temperature and verified it against field observations at the Maqu Network. The key findings are that the penetration depth can be estimated according to Lv’s T e f f scheme with the assumption of linear soil temperature gradient along the optical depth; and conversely, the soil temperature at the penetration depth should be equal to the soil effective temperature with the same linear assumption. The accuracy of this inference depends on to what extent the assumption of linear soil temperature gradient is satisfied. The result of this study is expected to advance understanding of the soil moisture products retrieved by SMOS and SMAP and improve the techniques in data assimilation and climate research

A novel global freeze-thaw state detection algorithm based on passive L-band microwave remote sensing

Knowing the Freeze-Thaw (FT) state of the land surface is essential for many aspects of weather forecasting, climate, hydrology, and agriculture. Near-surface air temperature and land surface temperature are usually used in meteorology to infer the FT-state. However, the uncertainty is large because both temperatures can hardly be distinguished from remote sensing. Microwave L-band emission contains rather direct information about the FT-state because of its impact on the soil dielectric constant, which determines microwave emissivity and the optical depth profile. However, current L band-based FT algorithms need reference values to distinguish between frozen and thawed soil, which are often not known sufficiently well. We present a new FT-state detection algorithm based on the daily variation of the H-polarized brightness temperature of the SMAP L3c FT global product for the northern hemisphere, which is available from 2015 to 2021. The exploitation of the daily variation signal allows for a more reliable state detection, particularly during the transitions periods, when the near-surface soil layer may freeze and thaw on sub-daily time scales. The new algorithm requires no reference values; its results agree with the SMAP FT state product by up to 98 % in summer and up to 75 % in winter. Compared to the FT state inferred indirectly from the 2-m air temperature of the ERA5-land reanalysis, the new FT algorithm has a similar performance as the SMAP FT product. The most significant differences occur over the midlatitudes, including the Tibetan plateau and its downstream area. Here, daytime surface heating may lead to daily FT transitions, which are not considered by the SMAP FT state product but are correctly identified by the new algorithm. The new FT algorithm suggests a 15 days earlier start of the frozen-soil period than the ERA5-land’s 2-m air temperature estimate. This study is expected to extend L-band microwave remote sensing data for improved FT detection